Construction advantages and properties of the Multiflow peristaltic pump
Flow rate:
0.01 to 600 ml/h using tubing with internal diameter 0.5 to 4 mm and wall thickness about 1 mm
Interesting construction features:
- Instead of small rollers, which are used by most pump producers, we use bearings of a larger diameter with glass beads. This reduces pulsations, friction and mechanical strain on the tubing leading to better pump performance.
- The bearings glide over the tubing so gently, that unlike other pumps, it is unnecessary to prevent movement of the tubing by a special fixation. In this manner the life time of the tubing is considerably increased.
- The pressure on the tubing is delivered individually through an off-center lever and spring made of stainless steel. This assures that a minimal pressure is applied to the tubing which still guarantees good functioning of the pump without unnecessary deformation of the tubing.
- The spring also reduces the liquid pressure to approx. 1 bar. This is useful when for any reason the line is blocked.
- The asymmetric pump head reduces pulsation.
- A high quality stepping motor together with integrated microprocessor electronics assure a high precision of flow rate with no inertia while turning the pump on and off.
- The pump head is made from hard, chemically stable epoxide.
- The pump dimensions have been minimized. Therefore the Multiflow pump is considerably smaller than other products of similar performance. The pump is easy to use and saves space in the laboratory.
- Remote control and the possibility of flow integration increases the scope of use of the pump in automatically controlled systems (eg. fermentation, chemical synthesis, fraction collection, etc.)
Economical:
high quality/price ratio, low use-costs, easy handling
Remote control:
Remote control of the speed by external voltage 010 V (020 or 420 mA); ON/OFF control by external contact or 312 V voltage; compatible with other LAMBDA instruments (Pump-Flow Integrator and Omnicoll fraction collector); RS 485 as option
Pump-Flow Integrator:
The Multiflow pump is the only peristaltic pump on the market, which allows a simple but precise integration of the amount of liquid which has been transported by the pump.
The electric impulses which move the stepping motor are registered and transformed into a direct current. The voltage can be measured or recorded by common recorders or voltmeters.
In processes where the pump is controlled eg. by a pH-stat during a fermentation to keep the pH of the medium constant, it is often important to know when and how much acid or base were added. This data yields important information about the process, its kinetics and time of completion. The Pump Integrator can also be used for measuring enzyme activity (eg. esterases, amidases, lactamases and other enzymes). The Pump-Flow Integrator can be placed under the Multiflow pump.
Guarantee:
3 years
Specifications:
| Power source: | 12 V DC using plug-in power supply 90240 V / AC 5060 Hz, consumption approx. 5 W |
|---|---|
| Weight: | 1.2 kg |
| Safety class: | CE, satisfies IEC Norm 1010/1 |
| Dimensions: | 10.5 (W) Χ 9.5 (H) Χ 10.5 (D) cm |