Features of the Omnicoll
- the only fraction collector which can be easily programmed for any rack or recipients according to your choice
- all electronic and mechanical components have been miniaturised and placed in one moving part, which is placed above the fractions, therefore, there is no danger of spilling and the lower part of the collector may be placed into a cooled air or water bath
- modern microprocessor system using several optical sensors, which register stop signals and collect fractions according to time or volume
- only the liquid conducting tubing is moved instead of the tubes, this requires much less energy and allows the collector to be miniaturised
- collection in lines or meander like
- several lower parts can be combined to increase the fraction collecting capacity of the collector
- the lower part of the collector can be used for carrying or storage of fractions
- new plastic fixing plate allows fixation of any rack or recipient to the collecting surface of the collector
- the highest safety for user has been attained by supplying Omnicoll with low voltage current (9 V / 12 W). This allows also an easy field application of Omnicoll
- solid metal construction makes Omnicoll insensitive to solvents
- when not used, Omnicoll can be easily dissembled and requires only a small storage space
- an autostop function switches off the collector and the fractionation after a selected rack or at the end of the range
- peristaltic pump flow-stop function during the change from one fraction to the next and at the end of the run
- practically no service required
- competitive price
- since a pause (from 0.1 to 999.9 min and 1 to 9999 min) can be programmed between fractions, Omnicoll can be used for taking samples (single or multiples) (for ex. during fermentation and other biological or chemical processes). The pause function can be used also for an automatic start up of the fraction collection. Washing of tubing between samples is possible since the number of fractions in a serie can be chosen.
- remote control allows sampling after reception of an external signal, (such as an alarm). In this way it is possible to obtain important samples during long processes running even during the absence of a supervisor
- drop counter 1—9999 and 60—599940, inert valve, RS232 and other accessories are available as an option
Specifications:
| Fractionation: | time 0.1—999.9 min in 0.1 min steps or 1—9999 min volume 0.01 to 500 ml, or 0.1 to 30 l through external signal or RS232 (option) with or without a pause from 0.1 to 999.9 min or 1 to 9999 min |
|---|---|
| Tube capacity: | according to your choice (available surface of 45 × 31 cm) eg. using Nalgene economy racks: 216 tubes × 13—16 mm diam. 160 tubes × 20 mm diam. 96 tubes × 30 mm diam. Capacity can be increased several times |
| Power supply: | 9 V / 12 W, using power supply plug for 90 to 240 V, 50—60 Hz |
| Safety: | meets CE and IEC 1010/1 norm for laboratory instruments |
| Operating temperature: | 0 to 40 °C |
| Weight: | 6.5 kg |
| Dimensions: | 34 × 30 × 49 cm (W × H × L) |
| Guarantee: | 2 years |